Home Audio Audio Solution Boxes Microphone Splitters

Microphone Splitters

show #:
microfoon splitter (Art)

Art PROSplit

microfoon splitter

Leverbaar binnen 5 werkdagen.
€ 59.00

Eight Channel Mic Splitter (Art)

Art S8

Eight Channel Mic Splitter

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals (eight pairs).

Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct outputs to the main or Front-of-House mixer, and the second isolated outputs being sent to a monitor or recording mixer. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones.

The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. For versatility the S8 also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, et cetera.

- Ideal solution for splitting microphone sources to feed multiple mixing consoles
- Fully transformer isolated
- Passes phantom power from main mixer
- Individual ground lift on each channel
- Individual pad switch on each channel
Leverbaar binnen 5 werkdagen.
€ 325.00

Eight-Channel 3-Way Microphone Splitter (Art)

Art S8-3WAY

Eight-Channel 3-Way Microphone Splitter

The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.

Each channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal.
Typical uses would include sending 8 direct signals through the S8-3WAY to a main Front-of-house mixer, with additional feeds going to a monitor mix station while transformer balanced isolated feeds are sent to remote recording desk or used for a broadcast feed.
The ART S8-3WAY features the same high-quality musical sounding transformers used in the popular ART S8, and is housed in a standard 1U space rack-mountable steel chassis designed for years of reliable operation.

- High quality passive interface
- Eight high performance transformers
- One direct and two transformer isolated output per channel
- Balanced XLR input and 3 balanced XLR per channel
- Extremely wide frequency response
- Extremely low voltage insertion loss
- Reversible rack ears for added system flexibility
- Live Sound, Permanent/Fixed install, Studio applications
Leverbaar binnen 5 werkdagen.
€ 379.00

8 in, 32 out Active Microphone/Line Splitter (ARX)


8 in, 32 out Active Microphone/Line Splitter

Superb Audio Quality:
Active microphone and line signal splitting has a number of benefits over using passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI.

About the MSX 32:
With these benefits in mind, the ARX MSX 32 Active Microphone/Line Splitter has been developed to deliver the performance required by the increasing complexity of today’s standards of audio production.

The MSX 32 consists of eight channels of actively buffered ultra low noise Microphone/Line Splitter. Each of these channels has four electronically Balanced splits – two outputs on the rear panel for Main and Monitor, plus two more output splits on the front panel. All splits have the option of transformer balancing if so specified.
Each channel has a –20 dB pad switch plus silently switchable 48V Phantom power with indicator LED. A PFL switch and 6 LED metering enables each channel to be easily checked with headphones for signal monitoring, and also for line tracing when troubleshooting.

Gain through the MSX 32 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB steps
A ‘Link’ switch links each channel to the previous one, providing an ultimate maximum of 32 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted.
Number stickers are provided to give each channel an individual number for up to 40 channels when multiple MSX32s are being used.

Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout.
Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1 as required.

Internal Power Supply:
The MSX 32’s internal toroidal transformer based power supply is triple shielded to get the maximum benefit from the ultra low noise design of the splitter circuitry.
An illuminated power switch on the front panel provides visual confirmation of AC power connection to the unit.
The headphone output and the 6 LED PFL metering are both mounted on the right hand side of the front panel. Rear panel connectors enable this function to be linked when using multiple MSX 32 units.

To sum up, this feature packed two RU device is the answer wherever transparent signal buffering and routing is required.
Leverbaar binnen 5 werkdagen.
€ 2,499.00

Microphone Splitters