Home Studio Studio Versterkers

Studio Versterkers


toon #:
Power Amplifier, 4x 100 Watt by 8 Ohm  (Art)

Art SLA4

Power Amplifier, 4x 100 Watt by 8 Ohm

Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.

The SLA-4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes. Separate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs. This maximizes flexibility by allowing the amp to be configured for best utilization in 2, 3, or 4 channel applications.

Designed for long-term reliability in any audio application, the SLA-4’s output is fully protected from short circuits. An ultrasonic network decouples RF from the output and helps keep the amplifier stable with reactive loads. The SLA4 is stable into loads as low as 2 ohms (stereo mode) or 4 ohms (bridged mode) making it ideal for virtually any installation application or complex system configuration.

The SLA-4 features SmartFan™, an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier’s cooling needs.

1/4-inch TRS and Euroblock balanced inputs as well as multi-way output binding posts are ensure the SLA4 can be quickly and easily tied in to any system without modification. A simple to install tamper proof cover is included.
Features

- Extremely Low Noise, Discrete Linear Design
- 4 x 100 Watts/Ch @ 8 Ohms, 140 Watts/Ch @ 4 Ohms
- 2 x 200 Watts/Ch @ 16 Ohms, 280 Watts/Ch @ 8 Ohms (bridged)
- 2 x 100 Watts/Ch @ 8 Ohms & 1 x 280 Watts @ 8 Ohms (bridged)
- Toroidal Transformer
- 10 Hz to 40 kHz Frequency Response
- 1/4-inch TRS, and Euroblock Balanced Inputs
- Recessed "Pop Out" Detented Gain Knobs
- Tamper-Proof Faceplate Included
- Multi-way Binding Post Outputs
- Low Profile 1U Rack-Mountable Design
- SmartFan Silent Cooling System
Op voorraad: Levertijd maximaal 3 werkdagen!
€ 569,00

Studio Eindversterker, 2x 40Watt bij 8 Ohm  (Lindell Audio)

Lindell Audio AMPX

Studio Eindversterker, 2x 40Watt bij 8 Ohm

Het Zweedse merk Lindell Audio staat bekend om producten met een messcherpe prijs/ prestatieverhouding. Zo ook de AMPX. Een dual mono, pure "Klasse A" versterker, ontworpen voor de fijnproever. Het linker en rechter kanaal zijn elektronisch gezien volledig los van elkaar opgebouwd wat leidt tot een perfecte kanaalscheiding.

"Klasse A" wil zeggen dat het positieve en het negatieve deel van het signaal (sinusgolf) door dezelfde eindtransistors wordt geproduceerd. Hierdoor is cross-oververvorming die in "non-Klasse A" versterkers optreedt, volledig afwezig. Kenners weten dat "Klasse A" versterkers geweldig klinken. Ze weten ook dat het stroomverbruik en daarmee de warmteafgifte, nogal hoog is. Met de AMPX kan de luisteraar in de winter de verwarming gerust een tandje lager zetten.

Te zeggen dat de AMPX robuust is gebouwd, is een understatement. Alles aan deze 22kg wegende versterker is zwaar en groot. En dat terwijl hij slechts 2x 40 Watt bij 8 Ohm produceert. Maar dat zijn dan ook wel 80 echte Watts.

Vergelijkbare ontwerpen van andere merken kosten minimaal tweemaal zoveel. En dat maakt de Lindell Audio AMPX nou precies zo interessant!
Leverbaar in 2 weken.
€ 1.499,00

Power Amplifier, 2x 100 Watt, 8 Ohm (Art)

Art SLA1

Power Amplifier, 2x 100 Watt, 8 Ohm

The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio or even select live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion.

Rated at 100 watts rms/channel @ 8 ohms (130 watts rms/channel @ 4ohms), with a frequency response from 10 Hz to 40 kHz the SLA-1 is perfect for professional, project and home studios. Capable of delivering 260 Watts when bridged mono into an 8 ohm load, the SLA-1 can easily move out of the studio and into any live rig or installation as an ideal monitor amplifier or zone amp solution.

Professional Features:
The SLA-1 has been designed to deliver in the most demanding audio applications. Housed in an aluminum and steel single space 19-inch rackmount chassis, the SLA-1 uses a proven toroidal transformer design for unmatched long-term reliability.

SmartFan™ Cooling System:
The SLA-1 features SmartFan, an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier’s cooling needs.

Versatile Connectivity:
XLR and 1/4-inch TRS balanced inputs as well as multi-way output binding posts are ensure the SLA-1 can be quickly and easily tied in to any system without modification. A simple to install tamper proof cover is included.

Features:
- Studio Linear Amplifier
- Extremely Low Noise, Discrete Linear Design
- 100 Watts/Channel @ 8 Ohms
- 260 Watts/Bridged Mono @ 8 Ohms
- Toroidal Transformer
- 10 Hz to 40 kHz within 1dB
- XLR & 1/4” Inputs
- Ground Lift Switch
- Silent, Thermal Dependent Cooling System
- Multi-Way Binding Post Outputs
- Low Profile 1U Rackmount Design
- All Steel and Aluminum Chassis
- Perfect for Pro and Project Studio
Leverbaar binnen 5 werkdagen.
€ 349,00


Studio Versterkers