Home Toetsen Midi Solutions - Tools

Midi Solutions - Tools


toon #:
1-in 2-out MIDI Thru Box (Midi Solutions)

Midi Solutions Thru

1-in 2-out MIDI Thru Box

The MIDI Solutions Thru is a 1-in 2-out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Op voorraad: Levertijd maximaal 3 werkdagen!
€ 44,95

MIDI converter for use with the Yamaha BC3A Breath Controller (Midi Solutions)

Midi Solutions Breath Controller

MIDI converter for use with the Yamaha BC3A Breath Controller

The MIDI Solutions Breath Controller is a breath to MIDI converter for use with the Yamaha BC3A Breath Controller (TM). The Breath Controller accepts the BC3A as input and generates continuous MIDI data corresponding to the amount of breath pressure applied to it. The Breath Controller will also accept older Yamaha BC2 units.

The Breath Controller can be programmed to send:
- Aftertouch
- Pitch Bend
- Control Change
- System Exclusive

The Breath Controller has a MIDI Echo parameter that is selectable on/off.

Another unique feature of the Breath Controller is its ability to add a variable amount of curvature to the response of the applied pressure of the BC3A. This allows you to correct for a nonlinear response, or to add greater response at one end of the breath range compared to the other.

The Breath Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). Once programmed, its settings are retained even after power is removed. The Breath Controller can be reprogrammed with new settings as often as needed. The Breath Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON.

The Breath Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Weight: 4.1 oz.
Dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Op voorraad: Levertijd maximaal 3 werkdagen!
€ 159,00

4-in 1-out MIDI Merger (Midi Solutions)

Midi Solutions Quadra Merge

4-in 1-out MIDI Merger

The MIDI Solutions Quadra Merge packs four MIDI inputs into a 4.5" x 2.5" x 1.25" package. All MIDI messages appearing at the four inputs of the Quadra Merge are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Quadra Merge is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Weight: 4.7 oz.
Dimensions: 4-3/16" x 2-3/16" x 1-3/32"

Op voorraad: Levertijd maximaal 3 werkdagen!
€ 118,95

Can be programmed to generate MIDI messages and perform MIDI functions (Midi Solutions)

Midi Solutions Footswitch Controller

Can be programmed to generate MIDI messages and perform MIDI functions

The MIDI Solutions Footswitch Controller can be programmed to generate MIDI messages and perform MIDI functions via a footswitch or contact closure.

The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include:
- Note
- Control Change
- Pitch Bend
- Program Change
- Start/Stop
- System Exclusive

Other functions include:
- Program Change INC/DEC
- Rechannelize
- Transpose
- Tap Tempo
- Note-on Filter
Op voorraad: Levertijd maximaal 3 werkdagen!
€ 131,00

Can be programmed with a unique MIDI processing functions (Midi Solutions)

Midi Solutions Event Processor

Can be programmed with a unique MIDI processing functions

If you need to map, filter, and process MIDI events in specific ways, the MIDI Solutions Event Processor may be exactly the solution you are looking for. The Event Processor offers 10 settings, each of which can be programmed with a unique MIDI processing function (for 32 settings see the Event Processor Plus). By combining these settings the Event Processor becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor works by comparing each incoming MIDI event with each of its 10 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor becomes an extremely powerful tool capable of achieving a wide range of MIDI-processing functions.

Following is a list of the Event Processor's functions, but better yet download the Event Processor Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

- Filter MIDI Events
- Map MIDI Events
- Trigger MIDI Events
- Cycle Through a Sequence of MIDI Events
- Turn Settings On and Off
- Store Incoming Values in Variables

The Event Processor is programmed by sending it MIDI System Exclusive messages). This is easily done with the Event Processor Programming Tools software. Once programmed, the Event Processor's settings are retained even after power is removed. The Event Processor can be reprogrammed with new settings as often as needed.

The Event Processor is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products. A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

- Weight: 3.8 oz.
- Dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Leverbaar in 2 weken.
€ 132,95

Thru 1 in 4 out MIDI Thru Box (Midi Solutions)

Midi Solutions Quadra Thru

Thru 1 in 4 out MIDI Thru Box

Leverbaar in 2 weken.
€ 52,00

2-in 1-out MIDI Merger (Midi Solutions)

Midi Solutions Merger

2-in 1-out MIDI Merger

The MIDI Solutions Merger is a 2-in 1-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

Weight: 3.8 oz.
Dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Leverbaar in 2 weken.
€ 72,00

Can be programmed with a unique MIDI processing functions (Midi Solutions)

Midi Solutions Event Processor Plus

Can be programmed with a unique MIDI processing functions

The MIDI Solutions Event Processor Plus offers all of the functionality of the MIDI Solutions Event Processor, with 32 settings instead of the Event Processor's 10, and 8 variable storage locations instead of the Event Processor's 2. Each of the Event Processor Plus's 32 settings can be programmed with a unique MIDI processing function. By combining these settings the Event Processor Plus becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor Plus works by comparing each incoming MIDI event with each of its 32 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor Plus becomes an extremely powerful tool capable of achieving virtually any combination of MIDI-processing functions.

Following is a list of the Event Processor Plus's functions, but better yet download the Event Processor Plus Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor Plus. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

- Filter MIDI Events
- Map MIDI Events
- Trigger MIDI Events
- Cycle Through a Sequence of MIDI Events
- Turn Settings On and Off
- Store Incoming Values in Variables

The Event Processor Plus is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the Event Processor Plus Programming Tools software. Once programmed, the Event Processor Plus's settings are retained even after power is removed. The Event Processor Plus can be reprogrammed with new settings as often as needed.

The Event Processor Plus is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

- Weight: 3.8 oz.
- Dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Leverbaar in 2 weken.
€ 169,00


Midi Solutions - Tools